Title : VACUUM BAG MOLDINGS

Details : An innovative manufacturing method for creating three-dimensional internal structures within composite components is presented. A technique is developed for the production of polymer matrix composite products containing both external faces and internal structures in a single process. The main focus is on the production of Chest Armor although the technique is transferrable to other hollow or foam cored composite products. This simple method employs a modified vacuum bagging technique, a concept borrowed from the aerospace industry, to produce conventional thick substrate, as well as multi-layer film devices. The bonds produced using this method are superior to those obtained using conventional bonding methods, including vacuum pressurizing, thick substrate devices were produced, as well as a six-layer film device that incorporated several complex features.

Call Now Download Abstract

Title : DEVELOPMENT OF COMPOSITE MATERIAL USING SUGARCANE BAGASSE, SISAL AND JUTE MATERIAL WITH ANGLE ORIENTATION

Details : Composites of various compositions with three different fibre orientation (0°, 30° and 40°) are fabricated using simple hand lay-up technique. It has been observed that there is a significant effect of fibre loading and orientation on the performance of jute/glass fibre reinforced epoxy based hybrid composites. The developed hybrid composites undergo different kinds of tests. The result shows hybrid composites having good strength and stiffness compared to natural hybrid composites.

Call Now Download Abstract

Title : DEVELOPMENT OF COMPOSITE MATERIAL USING E GLA SS AND E WASTE MATERIAL

Details : The main concern of this review will be to examine the causes of degradation of polyme ric components from the completion of fabrication to ultimate failure. Composites of various compositions with three different filler material orientation as 0 , 5 and 10 percentage are fabricated using simple hand lay - up technique. It has been observed t hat there is a significant effect of fibre loading and orientation on the performance of eglass fibre reinforced epoxy based hybrid composites. The developed hybrid composites undergo different kinds of tests. The result shows hybrid composites having good strength and stiffness compared to natural hybrid composites

Call Now Download Abstract

Title : DEVELOPMENT OF E GLASS AND CHICKEN FEATHER COMPOSITE

Details : Now-a-days, the natural fibres from renewable natural resources offer the potential to act as a reinforcing material for polymer composites alternative to the use of glass, carbon and other man-made fibres. A hybrid composite is a combination of two or more different types of fibre in which one type of fibre balance the deficiency of another fibre. Composites of various compositions with three different fibre 0, 5, 10 , 15 percentages are fabricated using simple hand lay-up technique. It has been observed that there is a significant effect of fibre loading and percentage on the performance of composites. The developed composites undergo different kinds of tests. The result shows composites having good strength and stiffness compared to natural hybrid composites. Keywords: Renewable, Mechanical Properties, filler material ratios.

Call Now Download Abstract

Title : DEVELOPMENT OF EGLASS AND RUBBER POWDER COMPOSITE MATERIAL

Details : Now-a-days, the natural fibres from renewable natural resources offer the potential to act as a reinforcing material for polymer composites alternative to the use of glass, carbon and other man-made fibres. A hybrid composite is a combination of two or more different types of fibre in which one type of fibre balance the deficiency of another fibre. Composites of various compositions with three different fibre 0, 5, 10 , 15 percentages are fabricated using simple hand lay-up technique. It has been observed that there is a significant effect of fibre loading and percentage on the performance of composites. The developed composites undergo different kinds of tests. The result shows composites having good strength and stiffness compared to natural hybrid composites.

Call Now Download Abstract

Title : DEVELOPMENT OF E GLASS JUTE EPOXY REINFORCED NATURAL HYBRID COMPOSITE

Details : Composites cannot be made from constituents with divergent linear expansion characteristics. Choice of fabrication method depends on matrix properties and the effect of matrix on properties of reinforcements. It is desired to produce low cost, high quality, sustainable and environmental friendly materials. It has been found from the researched study that the lower mechanical properties and poor compatibility between polymer matrix and fibers. E GLASS and JUTE are used in the process and are developed using hand lay up technique . angle orientation is done during the lay up technique.

Call Now Download Abstract

Title : DEVELOPMENT OF COMPOSITE USING CHOPPED E GLASS AND 360 GSM E GLASS

Details : A hybrid composite is a combination of two or more different types of fibre in which one type of fibre balance the deficiency of another fibre. Composites of various compositions with three different fibre orientation (0°, 30° and 40°) are fabricated using simple hand lay-up technique. It has been observed that there is a significant effect of fibre loading and orientation on the performance of jute/glass fibre reinforced epoxy based hybrid composites. The developed hybrid composites undergo different kinds of tests. The result shows hybrid composites having good strength and stiffness compared to natural hybrid composites. The chopped e glass and 360 gsm is used for the development of the composite material using resin and hardner .

Call Now Download Abstract